|
|
| Intergrated Oil cooler : |
 |
 |
| Intergrated Oil Cooler |
Oil Cooler Attachment |
|
| Parameter: |
Model |
Cooling capacity |
Input Power |
Voltage |
Oil Flow |
Air Flow |
Noise |
Weight |
Dimension |
|
(kw) |
(kw) |
(ACV) |
(L/min) |
(m3/h) |
dB(A) |
(kg) |
L*W*H (mm) |
XFL-1 |
7 |
0.75 |
380 |
25 |
1500 |
68 |
77 |
650*413*585 |
XFL-2 |
13 |
1.1 |
380 |
40 |
2800 |
70 |
96 |
700*482*605 |
|
Installing Process(Take XFL-1C as an example):
Installation procedure flow(take xfl-1c for example)
| 1. |
Install the cooler: place the cooler stable on the ground, 2.5 meters from the oil tank. |
| 2. |
Connect the oil route: connect the passing board connector to the inlet and outlet of the oil tank, insert two pics 0.7 meter long oil hose to the oil tank and connect them to the passing board connectors; use 2.5meter long hose to connect the oil inlet and outlet in the pump to the inlet and outlet of the cooler. |
| 3. |
The installation of the temperature control probe: fix the temperaturep robe o n t he top c over o f the oil tank. |
| 4. |
Connect the power supply: connect it to 380v.50hz electrical source, turn on the cooler, check whether the
wind direction is as showed by the arrow; if not, check the power supply. |
| 5. |
Set the working temperature: set the working temperature of the cooler , the cooler go into auto mode
automatically. |
|
|
|
|
|
|
